Hull Discoloration- Previous Repair?

[md84]

What do you guys think- I assume this discoloration is evidence of a past repair... There is some spidering of the gel coat. Boat is solid and hasn’t been beat on. I’m not too worried but curious what others think- I don’t have a lot of experience with fiberglass. Thanks in advance

 

[warthog5]

JUST like taking detailed pix's of paint.... They never show well.... Hard to tell a Lot from your pix's.... Some water sanding with a DA.....[1000,2000 & 3000gt] Then Buffing.....Then Polishing.

 

[md84]

JUST like taking detailed pix's of paint.... They never show well.... Hard to tell a Lot from your pix's.... Some water sanding with a DA.....[1000,2000 & 3000gt] Then Buffing.....Then Polishing.

I hear you and I appreciate the reply. I did the best I could with the pics- if you open them up and zoom in you can see a lot more. I attached a couple zoomed in markups below. I’m pretty sure there was a light sideswipe and repair here at some point. Maybe just not a great color match on the gel coat which makes it stand out. And possible the gel coat was put on a little too thick leading to all the light spiders in the repair area…

I’ll see if I can get some better pictures later today.

 

[1801Steve]

Yep, that's repaired gelcoat. Can't tell much else though.

 

[md84]

Yep, that's repaired gelcoat. Can't tell much else though.

Thanks- I took it to a local fiberglass guy and he’s going to fix me up